Quality
A welding sawhorse has to last for years on the shop floor. Here you can read which steel the WeldStand is made of, how the surface is treated and which dimensions to expect.
Solid S690QL steel
The U-beam is made of solid S690QL. This is high-strength structural steel, quenched and tempered, with a minimum yield strength of 690 MPa. Standard structural steel (S235) has a yield strength of 235 MPa.
Gas-nitrided to 800 HV
After machining, the beam is gas-nitrided. Nitrogen penetrates about 1 mm into the steel. This gives the surface a hardness of 800 HV and makes it corrosion-resistant.
Ø28 mm holes on a 50 mm grid
The holes are on the top and the sides, matching welding tables with a 28 mm system. Clamping bolts, clamps and stops fit straight in. There are also connection holes of Ø6.8 mm with M8 thread, at least 20 mm deep.
Height set to the millimetre
You set the working height from 750 to 1050 mm in 25 mm steps. The feet take care of the last millimetres. A standard foot carries 2 tonnes, a heavy-duty foot 4 tonnes.
Maximum load follows after testing
We measure the maximum load of the complete WeldStand before the first series is delivered in January 2027. As soon as the result is in, it will appear here and in the specifications.
Questions about the technical details? Contact us
