A welding sawhorse with Ø28 mm holes, set to the height of your welding table.

Rest long workpieces on the WeldStand and clamp them with the same tools you use on your table. Working height runs from 750 to 1050 mm.

View the WeldStand 28mm
Top view of the DCT welding table with the WeldStands behind it

Versions

Two lengths, two bases

The U-beam is 1000 or 1200 mm long. Choose the standard base with four legs, or the compact base with two separate legs.

Features

Fits your table, your clamps and your floor

Welding table with three WeldStands in line at the same height, together supporting a long clamped tube

The same holes as your welding table

Ø28 mm holes on a 50 mm grid, on the top and the sides. Your clamping bolts, clamps and stops fit straight in.

Right at table height

Set the working height from 750 to 1050 mm in 25 mm steps. The feet take care of the last millimetres, even on an uneven floor.

Solid and nitrided

The U-beam is solid S690QL steel, gas-nitrided to a depth of about 1 mm. That gives a surface hardness of 800 HV and makes the steel corrosion-resistant.

Combination

Together with a DCT welding table

DCT welding tables use the same Ø28 mm hole system as the WeldStand. Place the WeldStand at the end of your table and your work surface carries on, with the same clamps and stops on table and sawhorse.

DCT welding table with a WeldStand setup at the end, seen from above at an angle
  • Close-up of the WeldStands at the end of the DCT welding table
  • Detail: the WeldStand against the black frame of the DCT welding table, with the red WeldStand badge and the DCT emblem

Range

Complete or as separate parts

Choose your length, base and feet. Every part is also sold separately.

  • WeldStand 28mmComplete sawhorse. Choose length, base and feet.
  • U-beamsSeparate U-beam, 1000 or 1200 mm, with Ø28 mm holes.
  • BasesStandard with four legs, or compact with two separate legs.
  • FeetStandard, or lockable to fix to the floor.
  • BundlesTwo WeldStands with clamping tools from DCT.
View the catalogue

Technical

Specifications

Hole system
Ø28 mm
Hole grid
50 mm
U-beam material
Solid S690QL steel
Treatment
Gas-nitrided, approx. 1 mm deep
Surface hardness
800 HV
Working height
750–1050 mm, in 25 mm steps
Feet
Height adjustable per mm
U-beam (H × W × L)
150 × 200 × 1000 or 1200 mm
Connection holes
Ø6.8 mm with M8 thread, min. 20 mm deep
Complete weight
124 kg (1000 mm) or 139 kg (1200 mm)

Weight with standard base. With compact base: 107 kg (1000 mm) or 122 kg (1200 mm).

Close-up of the WeldStand: U-beam with Ø28 mm holes on the black base with the red WeldStand badge

Contact

Need several units, or have a question about the WeldStand?

Send us a message. For larger quantities we put together a quote.

Contact us